What do the tread wear indicators in the tyre grooves show?
Why
Tread wear indicators are small ridges 1.6 mm high at the bottom of the grooves. When the tread is flush with them, it has reached the legal minimum depth and the tyre must be changed. Pressure and the manufacturing date are found elsewhere.
Legal basis: RGVeh Anexo VII.2-3
The same question in Spanish (if you take the exam in Spanish)
¿Qué indican los testigos de desgaste que hay en las ranuras de la banda de rodadura?
- La fecha de fabricación y el índice de carga del neumático.
- Que el dibujo ha llegado a la profundidad mínima legal.
- La presión mínima de inflado cuando el neumático va cargado.
Share:
← Previous questionNext question →
More questions from this lesson
- Must a car carry a spare wheel?
- The steering wheel vibrates at a certain speed. What could be the cause?
- When should you replace a tyre with a cut or bulge in the sidewall?
- The main grooves of one of your car's tyres are 1.4 mm deep. May you drive on it?
- After a long motorway journey you check the tyre pressure and it is higher than recommended. What should you do?
- You are setting off on a trip with the car fully loaded. What pressure should the tyres have?
An original Drive Mundo question, written from the traffic rules. Not an official DGT question.